write | Guy L. PaceTo write, or not to write–that is the question:
Whether ’tis wiser in the heart to suffer
The stings and barbs of reviewers and readers
Or to take up pen against a sea of paper
And by writing, satisfy them.

(Apologies to Shakespeare.)

Okay, I promise not to hack The Bard any more.

Carolina Dawn is in the second round of editing with my editor. It’s been a year since I started the project during National Novel Writing Month (NaNoWriMo). I went through the rough draft a couple of times to fix a few things, make sure my timeline wasn’t all messed up, and polish it up. Then I let it simmer for entirely too long. I know. It was a busy summer.

I’m not working on a project this year for NaNoWriMo. I’ve done three NaNo’s, and produced three books. That’s a pretty good score for now. I plan to work on more short fiction and maybe put together a small collection. I may compile the Spirit Missions into a single, special volume and include the two short stories (Amy’s Lesson and The Gift) published here. That might be fun.

When I get closer to a publication date, I’ll keep you all posted and fill the Events page with readings, signings and all that. I hope next spring gets very busy with this third book out.

One of the best parts of writing, I found, is getting to meet readers. Especially young readers.

Keep writing.



Life sometimes takes a turn. Sometimes it gets in the way. Sometimes it just gets kinda full.

BugBear BooksBelieve me, I am not the world’s most disciplined writer. I work best under pressure of a deadline (thus my preference to use NaNoWriMo to complete first drafts). Getting through the first draft, or course, it a great thing. But, you have to go back through that draft and rewrite, edit, revise, and polish.

But, things happen. Life gets complicated. Those things that happen can drop you into a deep dark hole and it is hard to climb out. They happen and life is not ever the same. People you once counted on are no longer there. It makes it hard to focus on the first draft and get into the rewrite and revision.

Sometimes the things that happen are good, but they take a lot of your time and attention. Sometimes, they are not so good and they still take a lot of your time and attention. It is hard to pull your attention back to the work that needs doing and devote your time to it.

You can struggle to get back on task. Your heart isn’t in it. Your mind just comes up blank when you need ideas. Some call this writer’s block. Others call it depression, lack of focus or no motivation.

I’m not one to give up, though. I can wallow in my dark mind for a while. But, eventually I’ll get up, go in the kitchen, and make a fresh pot of coffee. When I return to the desk with that steaming mug of caffeine, I find new purpose. I find new inspiration. I’m motivated to get the work done.

It’s a fresh start. I’m ready to take it on.

Keep writing.


Get Mobile

Sometimes, you have to get mobile.

Scrivener LogoPrior to the current version of Scrivener, I would save a copy of my current project to a thumb drive (USB flash drive, the little dongle that plugs into one of the holes on your computer) and carry it along with my laptop when I traveled. This worked fine, for the most part, and I was able to continue work on a project while on the road.

With the current version of Scrivener, you have the option of using DropBox as your online storage site for a project and you can somewhat seamlessly go from the desktop to the laptop or iPad Pro and continue to work on that project. If you are working with one or more other writers on a project, this is a good option so long as your collaborators understand security and use common sense.

But–and there is always a “but”–I’m an old security curmudgeon. DropBox failed me on more than one occasion and I removed my account. I won’t go back. I have no need or wish to.

Since I’ve moved to Apple products as my primary platform, I’ve learned to use iCloud and iCloud Drive. What’s the difference? Well, from a security perspective there is a lot of difference. iCloud and iCloud Drive are tied to my AppleID. There is no intermediary cache that maintains my credentials and everything gets encrypted between my device (computer, laptop, tablet, phone) and the iCloud. But, for some reason, Scrivener wasn’t able to set the application to work from the iCloud Drive. Something about the number of files or dependencies in a project, as they told me. I can set Scrivener to maintain backups to my iCloud Drive, and I can Save As from the File menu and manually place a copy of my current project on my iCloud Drive (or the desktop, if it synchs with the iCloud Drive). Close the project or quit Scrivener on the desktop and give it some time to synch. Then, on my laptop, I can open that file and continue working.

The warning is, if you Save As, be ready to overwrite or add a draft number to the project file. If you overwrite, you might accidentally destroy some later work. If you add a draft number to the file name, you must keep that information in mind when you move to your mobile device. I prefer to verify what is on the iCloud Drive before I Save As the current project and keep the same file name across devices.

iPad Pro

The version of Scrivener for iPad Pro will not see Scrivener project files saved to iCloud Drive. They show up as file folders with no content. I worked around that once using a USB Disk tool to get the file on the iPad Pro, but the full version of Scrivener for the iPad Pro no longer supports that, it seems. I’m hoping that the folks at Literature And Latte are working to figure out how to make the iPad Pro version work with iCloud Drive.

In the meantime, I can start and work on a smaller project (say a short story) on the iPad Pro, get it to a finished state, and compile and export it to iCloud Drive in Word format (.docx format). From there I transfer the file to Pages for final revisions, formatting, etc. Pages saves the file on iCloud and I’m able to seemlessly move from the iPad Pro to the desktop or laptop.

There is always a way to work around things.

Keep writing.


What You Know

What You Know

Most have heard this advice about writing: Write what you know.

For new writers, especially younger ones, this is a confusing bit of advice. You want to write a mystery novel involving a murder set in Rome. Your mind is full of the plugs you’ll have: “International intrigue!” “Globe-trotting Sleuth!” But, then you heard someone say you should write what you know. CRASH! BURN! You’ve never been to Rome. You’ve never committed a murder. You have no experience in crime detection and investigation. Huh?

Here’s the truth. “Write what you know,” is a blow-off line. Incomplete. Inaccurate. It’s the advice you get from someone who just wants to cut you off at the knees. Why? Because you know a lot more than you think. Or–well–you will know a lot more. Follow me on this.


SettingOkay, you haven’t been to Rome. Big deal. Maps, Google, your browser, the library, bookstores, and other resources can get you all the information you need to create a setting sketch and write believable scenes set in Rome. Some writers use those travel guides they find in bookstores that provide details on restaurants, sights, events, and customs of a place like Rome or other cities.

The US State Department has information online for potential travelers for almost every destination on the planet. Here’s the link to information on the Holy See (Vatican City) in Rome. It also provides access to the CIA World Factbook for further information on the Holy See. If you want in-depth information, the State Department and the CIA are great resources. They are free. I don’t know if you can get access outside the US.

I used Google Maps and Street View as I worked through settings in Sudden Mission. I’d track where my characters would be on Google Maps, then drop down to Street View to see what they would see as they went down a specific street or highway. Near St. Louis, MO,  is a town named Edwardsville, IL. I know nothing about this town. I studied the maps carefully, looking for a route around St. Louis and across the Mississippi River. Edwardsville was a good find. I had my characters going up a residential street there just as I dumped a plague of frogs on them.

This image on the right is that street in Edwardsville, IL. This kind of tool makes it possible to describe a place accurately and realistically. I just added frogs. I used the scene to describe what happened in the novel and it added realism and authenticity. You’d never know I’ve never been to Edwardsville. Ever.

I wrote Sudden Mission in 2012, so I had to use Google Maps with Adobe Flash (Bad JuJu) installed on my system. When I didn’t need it any more, I took Flash off. Fortunately, Flash is no longer required. Most browsers support the protocols to render Street View correctly.

Setting Sketch and Research Section

The setting sketch provided in Scrivener’s templates can contain a lot of details you gather from the above resources.

In the research section of your project binder, you can add folders and documents, then cut and paste entire web pages or just links and references. This is handy. You can refer back to the items in your research section to verify details or facts. Keep links related to your work in progress from the US State Department and CIA World Factbook in folders here. Don’t be afraid to use the Factbook. It’s paid for by the US taxpayer and published for your benefit. As for Google Maps, take screen shots of your key places and save them in your research section.

Now, as for the murder. Do some research on crime scene investigation (not by watching TV). You want to avoid the CSI Effect. Research the law, police procedures, crime scene and evidence collection, evidentiary processes, custody of evidence, and anything else relevant. Since you set your crime in Rome, you’ll also want to check out law enforcement cooperation and investigation across international boundaries. Much of this information is found online with some searching. Here’s a Wikipedia link to get you started.

When you find something, dump the link, page, information into a document in your research section.

The key to remember is that nothing is ever as simple or straightforward as it might at first seem.

Oh fun, you say.

Keep writing.





I mentioned last week that Scrivener has templates for characters and settings to help you keep track of details.

Selecting a projectWhen you set up your project you choose the kind of project it will be. In this image I selected Fiction, and i have the choice of Scrivener setting up a n0vel, a novel with parts, or a short story. When I select novel, Scrivener sets up the basic format for manuscript and paperback layouts, as well as the front matter (title pages, cover, copyright). It even sets up a folder for Novel Projectresearch, where you can keep notes, references, and other material you will need as you go along. In the second image, I show the chapters and a few scenes and how to set up the work area. Here, I used the structure of the chapter/scene in the layout to create my basic outline. Each scene has a brief description of what would happen at that point.

At the bottom of the column on the left, there are templates for the character sketch and setting sketch. These are basic sketches and designed to give you a place to keep details of character and setting. Since my first two novels are not historical, I didn’t need Charactersextensive setting sketches. For the second novel, I used a lot of online resources, maps and building plans for the Washington, DC, locations.

Character, though, was something I spent more time developing. The sketch Scrivener provided was a great start to fleshing out my characters. I’ve since figured out a more dynamic method of character development, but I still use the sketches in Scrivener to keep track of details. That’s important as you go from one book to another and carry forward characters.

SettingAs mentioned, I didn’t make extensive use of the setting sketch. However, it is a good outline to keep handy if you’re working in a specific, rich, and detailed setting, or more than one setting. I spent more time on Google, Google Maps, satellite images, and other resources and would make my description before moving on. In Sudden Mission, that worked best because I didn’t intend for the characters to return to those sites later. Not practical filling out a dozen or more setting sketches for one time use.

However, in Nasty Leftovers, I did have my characters spend a lot of time in Washington, DC. I probably should have used setting sketches. They could have helped clear up some confusion in the editing process. Still, the imagery of an empty, toxic, DC was not hard to describe.

In book number 3 of this series, I’m pretty much laying waste to North Carolina. I just need to remember which bridges we’re blowing up. Also, in this series, I created this community vaguely on the east side of Raleigh, NC. I’m purposely trying to keep it vague and unidentifiable. I’m not sure why, but if I’m cornered, I’ll probably come up with something.

Keep writing.